|
WP rail |
|
|
|
|||||||
|
|
|
|
|
||||
|
|
|
The Concept 16 and Compact UPS |
|
||
|
|
|||
|
|
Concept
16 Telephone Concentrator The CONCEPT 16 Telephone Concentrator system has been designed to meet the exacting requirements
of Rail Administrations, especially when working in an
electrified environment. Based on the well-established CONCEPT 32 design,
CONCEPT 16 shares many of the same approved components, and
is particularly valuable where smaller numbers of
lines are required and space is at a premium. The CONCEPT 16 system is used to control up to 16
remote telephones via a single control point from where
each telephone may be called individually. |
|
|
|
Dimensions 380mm H x 300mm W x 210mm D Weight 10Kg approx Call
Safety/Security Absolute security of speech is fundamental to the
design. The called, calling or connected party is positively
identified and only one line can be connected at any
time. A third party cannot overhear a call, and call security is provided by
relay inter-locking which is monitored by a
microprocessor. Applications include control of Signal Post
Telephones (SPT’s) located at: • Signals • Point zones or ground frames • Level crossings • Station platforms |
|
||
|
|
Compact
UPS The CONCEPT 16 system may be powered by a local
50V dc supply or by our Compact UPS. The
system may be linked to any of the STS Rail range of
keyboards or custom keypanel products. Quality Inherent in the design is high reliability,
simplicity of operation and ease of maintenance. Dimensions 380mm H x 380mm W x 210mm D Weight 26Kg approx |
|
|
|
Approvals The CONCEPT 16 is approved under Section 22 of the Telecommunications Act 1984. A BABT approved version of the Telephone Interface (TIF) card and Auto Line card is available, and these cards also allow connection to the PSTN. These concentrator systems have Network Rail Product Approval PA05/02830, are CE approved and comply with Safety Standards EN 60950:2000, EMC Standards EN50121-4:2000 and R&TTE Standard R&TTE(1999/5/EC). |
|
||